pull new cm changes #46
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Use new property to filter apns. We need this new property because icc.operator_numeric property is also used in cdma and ApnSetting UI might display wrong set of apns if the peroperty value used was set by RuimRecords CRs-Fixed: 362846 Change-Id: I3831a703a2fdc69df8552af57e0bb981d0c7e46f
At present in Android all ICC Card states other than ICC PRESENT are treated as ICC ABSENT.Adding functionality to handle ICC IO error card state. CRs-Fixed: 184479 Change-Id: Id6a8cf8c7bb2ed441bf8db15b84c4e426537fdb1
Change-Id: I79c7ea2e647617e58526b5b550406214455a58aa
Following changes have been made as part of this: -> Changes done to display retry counter on wrong entry of PIN1,and message to indicate Code accepted/PIN1 blocked during PIN1 verification as per certain carrier requirements. ->The current APIs that are used to verify the PIN and PUK only convey whether the operation succeeded or failed. As a result on ANY failure clients ask the user to re-enter the PIN. Add 2 new APIs that report the actual error code in case of failure. ->Display the complete text including attempts remaining to unlock PIN on SimUnlockScreen if user entered incorrect PIN. On some devices the display text is ellipsized when trying to display on a single line. CRs-Fixed: 184479, 260481, 181402, 181380, 181401, 326286, 441001, 479414, 479417 Change-Id: I73718c9e6a8aa7244097e0dd4593a6226ff0ac08
Add RIL_REQUEST_IMS_REGISTRATION_STATE, RIL_REQUEST_IMS_SEND_SMS, and RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED. Add FORMAT_UNKNOWN to SmsConstants Change-Id: Iabaf4cce9f1da94f3f263d09cdd0bc29fbea741d
Change-Id: I435a602eb34b16a0c7a9e17a3102e249c98c6bb9
1)TD-SCDMA Signal Strength display changes. 2)Add TD-SCDMA network type support in MobileDataStateTracker class to identify TD-SCDMA as UMTS variant and use the relevant kernel data stack tcp buffer sizes defined. + Telephony: Display 3g icons for tdscdma Updated: As per technology order & keeping in view of future changes, add TDSCDMA case along with UMTS type. Change-Id: I158821574484bfaf47d1660406e591e2afb3be5e CRs-Fixed: 403258
- Add IMS phone type constant - Add system property persist.radio.calls.on.ims. It is set to true if VoLTE/VT calls are supported, false otherwise. Change-Id: I9b2ea0e58bd75598c519ff710a93d7667a9c7993
Add enable/disable APIs for Cdma broadcast to ISms.aidl Change-Id: I8fb563d92691d0ce97395ed283165dc9179b586a
Add strings and constants required for stk cc feature. Change-Id: Ief5786d3010467ec835096eaf1c02f67f2e5e0d1
Default values for class members mLac, mCid, mPsc would be 0. Initialize these variables with -1 as 0 is considered as valid value. CRs-Fixed: 406479 Change-Id: I08dc4031bb16293e80e5b7f51afcb8dc11747d3b
Make changes to add support for MultiSim. -Add TelephonyManager and TelePhonyRegistry for MultiSim -Add ITelephony and IPhoneSubinfo aidl files for MultiSim -Extend ShutdownThread to close all radio's for MultiSim -Add Constants and Utils used for MultiSim Change-Id: I6ee5d2a22e44fe7d0d68a41af0481ddbbbe21c3f
Added Null check for detector.detectCountry(), if this function call fails, then CountryIso will be picked up based on the Locale. CRs-Fixed: 490472 Change-Id: Ia94891629cf6170a821f76a718d4b965ae7ab802
Add MMS_TRANSACTION property which enables silent or prompt modes to download MMS on non-DDS sub. Change-Id: I52fe5c095e0d69c2e0d4a7fd5bfeb77bf3289380
Change default subscription property name from persist.default.subscription to persist.radio.default.sub so that it can be set by radio group access processes. Change-Id: I0a75eca8c88c54e8f68ebd029abecb17249a546a
Add support for Signal Strength icon display for MultiSim. Add support for NO SIM icon support for multiple SIMs. Change-Id: I11fb6ed37e7ba40b8db7840feedd109557128758
- Enable data connected flag based on the data state.
- Do not display data icon in data connected state
if radio type is unknown
- Display data icon independent of voice service state
i.e even if voice network is unavailable
- Show cdma roaming indicators if either voice
or data is roaming.
- Cleanup roaming indicator default values.
Set default CDMA Eri index to roaming off
- Show service if either voice/data is in
service if ro.config.combined_signal is true
- Consider eri only when in service
- Add in service check to isCdmaEri.
roaming related information
in registration state will not be valid
during out of service.
CRs-Fixed: 285986, 303275, 326204, 326634, 333008,
339297
Change-Id: I915421a6f5906d80ed5b8dd9c433115ad5df1f14
When back to back VOLTE calls are made, sometimes next MO VOLTE call is failing due to a NullPointerException. The issue is because of unexpected value in getting the current country code. Added null check for detector.detectCountry(), if this function call fails, then CountryIso will be picked up based on the Locale CRs-Fixed: 478645, 490472 Change-Id: I9f35fe959fc072bf59a6aabc6c17dc4162426721
Add network mode TD-SCDMA to the list of supported network modes. CRs-Fixed: 479310 Change-Id: I132ac6a2108ef641ce4e71942a5c057a8df8e76c
Change-Id: I8f68d6d9e1e188a2c2295a814376dccaaad5ec24
Add the priority support in 3gpp2 text message Change-Id: I27e92709a04a89c125424f99c2c61fbf6802c6b1
-> Add CarrierText, SimPinView and SimPukView classes for MSIM. -> Add support to Display Multiple operator name. -> Add Support for Multiple PIN/PUK Lock screens. -> Overload few Keyguard methods to take sub info. Change-Id: I500129a5dc09adcb2cd8eb664d30ae2e8bad2642
Added support for all ME De-Personalizations as per specs 3GPP2 C.S0068-0 and 3GPP TS 22.022. CRs-fixed: 467276 Change-Id: Iba74e3e5eb4fe96361585f4933897c5c8f17db97
1. Add App state DETECTED in the IccCardConstants.State enum. Modified logic for allowing PIN cancel based on number of cards configured/activated instead of number of cards present. 2. Add method in ITelephonyMSim.aidl to retrieve PIN1RetryCount. Display Attempts remaining in PIN/PUK lockscreen UI. 3. Clean up KeyguardUpdateMonitorCallback and MSimCarrierText by removing Initialize method from Callback. Change-Id: I89c9825b35257c1cca5946bf0cbffedb07d0015b CRs-Fixed: 501887, 504086, 508283, 510400, 513293
Remove CDMA cellbroadcast API's, handle CDMA cellbroadcast management based on phone type in IccSmsInterfaceManager to sync with AOSP. Change-Id: I25b382d232799e964e8812de99c46e2dd372b20f
Introduce CSVT Service which provides necessary API
for Circuit-Switch Video Telephony.
Change-Id: I1d483212450720d64d05f4e2b02abf8da9f4b37e
Populate ecclist by reading ril.ecclist corresponds to each subscription. If dialed number is present in consolidated ecclist then mark as emergency number. Change-Id: Ibba48a930e29dac0d80d0c8add2e01214a9bf9c3 CRs-fixed: 445415
Add support for NETWORK_TYPE_GSM in TelephonyManager and corresponding mapping in ServicState.java so that when application queries getVoiceNetworkType() and currently camped rat is GSM, they get network mode as GSM instead of network mode unknown. Change-Id: I5e971c625532696776b9555ad8cfd85eba4fc423 CRs-Fixed: 526435
Define a new constant for invalid subscription id. Change-Id: I7bc433d5f24c70b710cde7ef5ac362b7ee945d2d CRs-Fixed: 529780
It is required to reload apns when data rat switches from gsm to cdma Change-Id: Ifdb04d0c8be325a226dbc707a3fa8c8c697089fa CRs-Fixed: 530277
Remove navigation bar layout XML override which wasn't needed anyway, as the views in mid_navigation_bar are already reordered based on the layout direction anyway. Change-Id: Id57c781d9580fa0cb2eab3bb332daf4136bec321 JIRA:CYAN-2557
… is empty. This often occurs after an incomplete reboot/shutdown or battery pull. Change-Id: I4f01151f4051df4ae1b85fa460ec7a9e70122878
* Turns out the default user will always be present, meaning a check of user count == 0 fails. Change-Id: Id8e8e75c5f51c73a60d7b9039298ecb90e572bc9
Change-Id: I42203d7c0173e6cd880da3937f88e8f5c501db9d
This reverts commit e5b947e. Change-Id: If8fea813b1fdfc05be81e1e3a0213c85f3c35ecc
…ory.xml is empty. This often occurs after an incomplete reboot/shutdown or battery pull." into cm-10.2
Change-Id: I6b651d6b552ab3caf30102d289469eaf68f58a0e
In the event that the profile doesn't have a photo, don't default to the user's photo, instead show a default avatar. Change-Id: I80de324ae1e151693cf3716bf87d39a16096ca12
Handle the case of system uid in AppOpsManager Change-Id: I5f9c3ba2e2ed0b1c825b995bf2724066ae796bb4
Use paddingStart for rtl compatibility Change-Id: I6c61dfe460eb31c25013c68928935c54dc18baff
Change-Id: I281083572d07773e4a00079bd947bfd0f4ddf6bb
Rather than distributing the padding evenly to get around RTL issues, remeasure on layout changes. Change-Id: Ic6f7a58bd64bf2c99f0e07edb0d8fb8cdb9aa398
Use padding left consitently since paddingStart takes care of its automatic value. Change-Id: I187e79489a26dd4e5328f816bb69c79f177697e8
Small fixes Change-Id: I0b766d6950083d08783cf7aeb57445f6d8322e77
Change-Id: I61cd2410aac3e0cf99023d00f82a8467d9f4bbec
Change-Id: I4440e5d749cb40581df13192b184aaff7fa806b1
The stylus eraser appeared not to work, i.e. Android did not respond to input from the eraser. It turned out that all input except stylus input is rejected when palm rejection is activated. The problem was that the eraser itself activates palm rejection when it hovers. The solution is to allow the eraser during palm rejection. This solution makes sense because the eraser input works in the exact same way as normal stylus input. Change-Id: I90824500be7613af4f00427c59ce828528b632f7
Change-Id: I01892a3743affd7449f0c87859ff7b151f630f1c (cherry picked from commit 4875495)
… under second user, Change-Id: I8173559b2c734968ef4a8d86fddaa3a73d5c2b1e (cherry picked from commit fe625c5)
Actually, the initial status of airplane mode toggle is set to false when the power menu dialog is initialized. This causes an issue if you set airplane mode and then reboot. After the reboot, the dialog displays the wrong airplane mode status, eg. "Airplane mode is not active", and if you toggle that option, a wrong intent is sent again to put ON the airplane mode, instead of OFF, the toggle (that is in transition state) will be set disabled. This commit fixes this issue. Change-Id: Id30355c1e090355645c437086c79ab59093c27a8 (cherry picked from commit 9b9df54)
Change-Id: I0afe5a6f5a1f17f92e615ef79fa6e52226c40522
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
?