nodes react but no update for power and other #1338
-
Hi Team, thanks again for the excellent software ! I did use the zwave2mqtt for long time but yesterday I decided to make the step to zwavejs2mqtt. After some time all seems to work but when switching ON a switch I don't get the power or other items automatically. e.g. switch On a Fibaro wallplug with ~600Watt load in the control-panel is successful, but the measured power by the wall-plug stays at 0Watt. Only when pushing the "refresh" button in the control-panel I can manage to see the power. I'm using version 5.0.1, around 25 nodes and all seems to have trouble with reading values. Hope you can give me some direction.. |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments 1 reply
-
Please check the association groups, if your device isn't reporting changes it could be because the lifeline association is not setted up correctly with the controller or could be a device issue. @AlCalzone |
Beta Was this translation helpful? Give feedback.
-
Many thanks, this was the hint to solve the issue ! What I did => For each node I performed "Advanced => Associations => Clear" followed by "Advanced => Interview" The nodes are working as before and I have the great feeling my Zwave network is under control again! Thanks ! |
Beta Was this translation helpful? Give feedback.
Please check the association groups, if your device isn't reporting changes it could be because the lifeline association is not setted up correctly with the controller or could be a device issue. @AlCalzone