-
-
Notifications
You must be signed in to change notification settings - Fork 31
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[Bug]: there is no launch after the update #77
Comments
Hi @whakru, I'm going to look at all the defects you opened soon. I then started Firefly Luciferin app v2.7.3 and no issue occurred. I'll keep you posted. |
@sblantipodi |
@whakru I'm not able to reproduce this one. sometimes routers may have some disconnections problems with the ESP devices, Please take in mind that when you open Firefly Luciferin it can take some seconds to detect the ESP, wait 30 seconds in the worst case ever. I leave this issue open, if you would like to try to reproduce it we can still investigate further to understand |
I have seen that you selected a baudrate of 2000000. Generally ESP8266 doesn't handle baudrate over 15000000, If you want to use the USB cable instead of the WiFi stream (not really recommended if you have a good wifi signal) a baudrate that is too big for your microcontroller may create problems to the PC while connecting to the microcontroller. |
yes of course, I waited more than 10 minutes. The device was accessible through a browser. but it didn't show up in the app. Tried restarting the device, also tried restarting the computer. gave no result. Perhaps the problem is really temporary on the side of the router. but what is strange is that the device is available in the local wifi network. As soon as I have time, I will definitely try to reboot everything. it will be in a few days. |
this did not cause problems for me earlier, but I understood you and will take this into account in the future. |
|
@whakru please open the browser to on the right top corner you can access the firmware settings. what is the device name? Do you see the device in Firefly Luciferin as soon as you start the software? Can you show me a screenshot of the "Mode tab" and one of the "WiFi/MQTT tab" please? |
I clearly have a problem with the application, it does not start after clicking the save button. |
@sblantipodi |
Thank you very much for reporting the problem, I really appreciate your continued support @whakru. I'll fix it. |
Firefly Luciferin version
v2.7.3
Glow Worm Luciferin version
--
Firmware type
FULL
What is the stream method?
USB
Fiefly Luciferin config file
Relevant log output
How to reproduce
win 10
reinstalled, updated java. it didn't help.
The complete removal of the Fire fly Lucifer in.yaml configuration file helped
FireflyLuciferin.yaml
The text was updated successfully, but these errors were encountered: