diff --git a/docs/docs/walkthrough/phase-0/hardware.md b/docs/docs/walkthrough/phase-0/hardware.md index ada8f5889..ca8772c09 100644 --- a/docs/docs/walkthrough/phase-0/hardware.md +++ b/docs/docs/walkthrough/phase-0/hardware.md @@ -19,6 +19,7 @@ If you're interested in working on communication for another pump (Omnipod, Anim * 523/723 (with firmware 2.4A or lower) * 554/754 (European Veo, with firmware 2.6A or lower) * (To check firmware, hit Esc on the home screen and scroll all the way to the bottom. You can also go into the Utilities menu and look for a PC Connect option. If that is present, the pump will *not* work for looping. If it's absent, it should be able to receive temp basal commands.) + * If you have one of the above mentioned pumps, but it has buttons that do not work, use the instructions found on this [Imgur photo album](http://imgur.com/a/iOXAP) to repair your pump. * A way to communicate with the pump: * Medtronic CareLink USB stick is the recommended option for your initial loop setup