am3517-evm.cfg

; bdiGDB configuration for the AM3517 EVM

[INIT]

[TARGET]
CPUTYPE     OMAP3500
CLOCK       1                   ;JTAG clock
POWERUP     2000                ;power-up delay
TRST        PUSHPULL            ;TRST driver type (OPENDRAIN | PUSHPULL)
;RESET	    NONE	        ;Reset signal is not routed to the debug
STARTUP     RESET
;STARTUP     RUN                ;let boot code setup the system
ENDIAN      LITTLE              ;memory model (LITTLE | BIG)
WAKEUP      100
;MEMACCESS   CORE  1             ;memory access via core (8 TCK's access delay)
MEMACCESS   AHB   1             ;memory access via AHB  (8 TCK's access delay)
STEPMODE    OVER                ;OVER or INTO
VECTOR      CATCH

; Configure ICEPick module to make Cortex-A8 DAP-TAP visible
SCANINIT    t1:w1000:t0:w1000:  ;toggle TRST,
SCANINIT    ch10:w1000:         ;clock TCK with TMS high and wait
SCANINIT    i6=07:d8=89:i6=02:  ;connect and select router
SCANINIT    d32=81000080:       ;IP control: KeepPowered
SCANINIT    d32=a3002048:       ;TAP3: DebugConnect, ForcePower, ForceActive
SCANINIT    d32=81000081:       ;IP control: KeepPowered, SysReset
SCANINIT    d32=a3002148:       ;enable TAP3
SCANINIT    cl10:i10=ffff       ;clock 10 times in RTI, scan bypass

SCANPRED    1 6                 ;count for ICEPick TAP
SCANSUCC    0 0                 ;no device after Cortex-A8

[HOST]
IP          10.10.10.30
FILE        dump.bin
FORMAT      BIN 0x80000000
LOAD        MANUAL
PROMPT      AM3517-EVM>

[FLASH]

[REGS]
FILE	regOMAP3500.def