init.lua

--[[

What is Kickstart?

  Kickstart.nvim is *not* a distribution.

  Kickstart.nvim is a starting point for your own configuration.
    The goal is that you can read every line of code, top-to-bottom, understand
    what your configuration is doing, and modify it to suit your needs.

    Once you've done that, you can start exploring, configuring and tinkering to
    make Neovim your own! That might mean leaving kickstart just the way it is for a while
    or immediately breaking it into modular pieces. It's up to you!

    If you don't know anything about Lua, I recommend taking some time to read through
    a guide. One possible example which will only take 10-15 minutes:
      - https://learnxinyminutes.com/docs/lua/

    After understanding a bit more about Lua, you can use `:help lua-guide` as a
    reference for how Neovim integrates Lua.
    - :help lua-guide
    - (or HTML version): https://neovim.io/doc/user/lua-guide.html
    sorting_strategy = "ascending",

Kickstart Guide:

  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.

    If you don't know what this means, type the following: - <escape key>
      - :
      - Tutor
      - <enter key>

    (If you already know how the Neovim basics, you can skip this step)

  Once you've completed that, you can continue working through **AND READING** the rest
  of the kickstart init.lua

  Next, run AND READ `:help`.
    This will open up a help window with some basic information
    about reading, navigating and searching the builtin help documentation.

    This should be the first place you go to look when you're stuck or confused
    with something. It's one of my favorite neovim features.

    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
    which is very useful when you're not sure exactly what you're looking for.

  I have left several `:help X` comments throughout the init.lua
    These are hints about where to find more information about the relevant settings,
    plugins or neovim features used in kickstart.

   NOTE: Look for lines like this

    Throughout the file. These are for you, the reader, to help understand what is happening.
    Feel free to delete them once you know what you're doing, but they should serve as a guide
    for when you are first encountering a few different constructs in your nvim config.

If you experience any errors while trying to install kickstart, run `:checkhealth` for more info

I hope you enjoy your Neovim journey,
- TJ



P.S. You can delete this when you're done too. It's your config now! :)
--]]

-- Set <space> as the leader key
-- See `:help mapleader`
local set = vim.keymap.set
set('n', '<M-Left>', '<c-w>5<')
set('n', '<M-Right>', '<c-w>5>')
set('n', '<M-t>', '<C-W>+')
set('n', '<M-s>', '<C-W>-')
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

-- Set to true if you have a Nerd Font installed
vim.g.have_nerd_font = true

-- [[ Setting options ]]
-- See `:help vim.opt`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`
-- Make line numbers default
vim.opt.number = true
-- You can also add relative line numbers, for help with jumping.
--  Experiment for yourself to see if you like it!
vim.opt.relativenumber = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = 'a'

-- Don't show the mode, since it's already in status line
vim.opt.showmode = false

-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.opt.clipboard = 'unnamedplus'

-- Enable break indent
vim.opt.breakindent = true

-- Save undo history
vim.opt.undofile = true

-- Case-insensitive searching UNLESS \C or capital in search
vim.opt.ignorecase = true
vim.opt.smartcase = true

-- Keep signcolumn on by default
vim.opt.signcolumn = 'yes'

-- Decrease update time
vim.opt.updatetime = 250
vim.opt.timeoutlen = 900

-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Sets how neovim will display certain whitespace in the editor.
--  See `:help 'list'`
--  and `:help 'listchars'`
vim.opt.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣', eol = '↲' }

-- Preview substitutions live, as you type!
vim.opt.inccommand = 'split'

-- smart indent
vim.opt.smartindent = true

-- Show which line your cursor is on
vim.opt.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 10

-- [[ Basic Keymaps ]]
--  See `:help vim.keymap.set()`

-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et
-- vim.api.nvim_set_hl(0, 'TelescopeNormal', { bg = 'none' })
vim.api.nvim_set_hl(0, 'FloatBorder', { bg = 'None' })
-- vim.api.nvim_set_hl(0, 'NormalFloat', { bg = 'None' })
vim.api.nvim_set_hl(0, 'TelescopeNormal', { bg = 'None' })
vim.api.nvim_set_hl(0, 'TelescopeBorder', { bg = 'None' })
vim.api.nvim_set_hl(0, 'TelescopePromptBorder', { bg = 'None' })
vim.api.nvim_set_hl(0, 'SignColumn', { bg = 'None' })
vim.api.nvim_set_hl(0, 'LineNrAbove', { fg = '#F6F6F6' })
vim.api.nvim_set_hl(0, 'LineNrBelow', { fg = '#F6F6F6' })
vim.keymap.set('n', '<F8>', ':w<CR>:!g++ % -o %:r;./%:r<CR>')
-- Diagnostic keymaps
vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
-- vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- TIP: Disable arrow keys in normal mode
-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
-- vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
-- vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
-- vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
-- vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.highlight.on_yank()`
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function()
    vim.highlight.on_yank()
  end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

-- [[ Configure and install plugins ]]
--
--  To check the current status of your plugins, run
--    :Lazy
--
--  You can press `?` in this menu for help. Use `:q` to close the window
--
--  To update plugins, you can run
--    :Lazy update
--
-- NOTE: Here is where you install your plugins.
require('lazy').setup({
  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically

  -- NOTE: Plugins can also be added by using a table,
  -- with the first argument being the link and the following
  -- keys can be used to configure plugin behavior/loading/etc.
  --
  -- Use `opts = {}` to force a plugin to be loaded.
  --
  --  This is equivalent to:
  --    require('Comment').setup({})

  -- "gc" to comment visual regions/lines
  { 'numToStr/Comment.nvim', opts = {} },

  -- Here is a more advanced example where we pass configuration
  -- options to `gitsigns.nvim`. This is equivalent to the following lua:
  --    require('gitsigns').setup({ ... })
  --
  -- See `:help gitsigns` to understand what the configuration keys do
  { -- Adds git related signs to the gutter, as well as utilities for managing changes
    'lewis6991/gitsigns.nvim',
    config = function()
      require('gitsigns').setup {
        -- signs = {
        --   add = { text = '+' },
        --   change = { text = '~' },
        --   delete = { text = '_' },
        --   topdelete = { text = '‾' },
        --   changedelete = { text = '~' },
        -- },
        signs = {
          add = { text = '┃' },
          change = { text = '┃' },
          delete = { text = '_' },
          topdelete = { text = '‾' },
          changedelete = { text = '~' },
          untracked = { text = '┆' },
        },
        signcolumn = true,
        watch_gitdir = {
          follow_files = true,
        },
        sign_priority = 6,
        current_line_blame = false, -- Toggle with `:Gitsigns toggle_current_line_blame`
        current_line_blame_opts = {
          virt_text = true,
          virt_text_pos = 'eol', -- 'eol' | 'overlay' | 'right_align'
          delay = 1000,
          ignore_whitespace = false,
          virt_text_priority = 100,
        },
        current_line_blame_formatter = '<author>, <author_time:%Y-%m-%d> - <summary>',
        -- current_line_blame_formatter_opts = {
        --   relative_time = false,
        -- },
        update_debounce = 100,
        status_formatter = nil,
        preview_config = {
          -- Options passed to nvim_open_win
          border = 'single',
          style = 'minimal',
          relative = 'cursor',
          row = 0,
          col = 1,
        },
        on_attach = function(bufnr)
          -- vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hr', '<cmd>lua require"gitsigns".reset_hunk()', { desc = 'git [r]eset hunk' })
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hs', '<cmd>lua require"gitsigns".stage_hunk()<CR>', {})
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hu', '<cmd>lua require"gitsigns".undo_stage_hunk()<CR>', {})
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hd', '<cmd>lua require"gitsigns".diff_this()<CR>', {})
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hb', '<cmd>lua require"gitsigns".blame_line()<CR>', {})
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hp', '<cmd>lua require"gitsigns".preview_hunk_inline()<CR>', {})
          -- vim.api.nvim_buf_set_keymap(bufnr, 'n', ']h', '<cmd>lua require"gitsigns".next_hunk()<CR>', {})
          -- vim.api.nvim_buf_set_keymap(bufnr, 'n', '[h', '<cmd>lua require"gitsigns".prev_hunk()<CR>', {})
          vim.api.nvim_buf_set_keymap(bufnr, 'n', '<leader>hr', '<cmd>lua require"gitsigns".reset_hunk()<CR>', {})
        end,
      }
    end,
  },

  -- NOTE: Plugins can also be configured to run lua code when they are loaded.
  --
  -- This is often very useful to both group configuration, as well as handle
  -- lazy loading plugins that don't need to be loaded immediately at startup.
  --
  -- For example, in the following configuration, we use:
  --  event = 'VimEnter'
  --
  -- which loads which-key before all the UI elements are loaded. Events can be
  -- normal autocommands events (`:help autocmd-events`).
  --
  -- Then, because we use the `config` key, the configuration only runs
  -- after the plugin has been loaded:
  --  config = function() ... end
  -- NOTE: Plugins can specify dependencies.
  --
  -- The dependencies are proper plugin specifications as well - anything
  -- you do for a plugin at the top level, you can do for a dependency.
  --
  -- Use the `dependencies` key to specify the dependencies of a particular plugin

  { -- Fuzzy Finder (files, lsp, etc)
    'nvim-telescope/telescope.nvim',
    event = 'VimEnter',
    branch = '0.1.x',
    dependencies = {
      'nvim-lua/plenary.nvim',
      { -- If encountering errors, see telescope-fzf-native README for install instructions
        'nvim-telescope/telescope-fzf-native.nvim',

        -- `build` is used to run some command when the plugin is installed/updated.
        -- This is only run then, not every time Neovim starts up.
        build = 'make',

        -- `cond` is a condition used to determine whether this plugin should be
        -- installed and loaded.
        cond = function()
          return vim.fn.executable 'make' == 1
        end,
      },
      { 'nvim-telescope/telescope-ui-select.nvim' },

      -- Useful for getting pretty icons, but requires a Nerd Font.
      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
    },
    config = function()
      -- Telescope is a fuzzy finder that comes with a lot of different things that
      -- it can fuzzy find! It's more than just a "file finder", it can search
      -- many different aspects of Neovim, your workspace, LSP, and more!
      --
      -- The easiest way to use telescope, is to start by doing something like:
      --  :Telescope help_tags
      --
      -- After running this command, a window will open up and you're able to
      -- type in the prompt window. You'll see a list of help_tags options and
      -- a corresponding preview of the help.
      --
      -- Two important keymaps to use while in telescope are:
      --  - Insert mode: <c-/>
      --  - Normal mode: ?
      --
      -- This opens a window that shows you all of the keymaps for the current
      -- telescope picker. This is really useful to discover what Telescope can
      -- do as well as how to actually do it!

      -- [[ Configure Telescope ]]
      -- See `:help telescope` and `:help telescope.setup()`
      require('telescope').setup {
        -- You can put your default mappings / updates / etc. in here
        --  All the info you're looking for is in `:help telescope.setup()`
        --
        defaults = {
          mappings = {
            i = { ['<C-enter>'] = 'to_fuzzy_refine', ['<C-u>'] = false },
            n = { ['<M-p>'] = require('telescope.actions.layout').toggle_preview },
          },
        },
        -- pickers = {}
        extensions = {
          ['ui-select'] = {
            require('telescope.themes').get_dropdown(),
          },
        },
      }

      -- Enable telescope extensions, if they are installed
      pcall(require('telescope').load_extension, 'fzf')
      pcall(require('telescope').load_extension, 'ui-select')

      -- See `:help telescope.builtin`
      local builtin = require 'telescope.builtin'
      local bottom_min = require('telescope.themes').get_ivy {
        winblend = 0,
        previewer = true,
        border = false,
        borderchars = {
          prompt = { '─', '│', 'x', '│', '╭', '┬', '│', '│' },
          results = { '─', '│', '─', '│', '├', '┤', '┴', '╰' },
          preview = { '─', '│', '─', ' ', '─', '╮', '╯', '─' },
        },
        layout_config = {
          height = 15,
        },
      }
      vim.keymap.set('n', 'z=', function()
        builtin.spell_suggest(require('telescope.themes').get_cursor { border = false })
      end)
      vim.keymap.set('n', '<leader>sh', function()
        builtin.help_tags(require('telescope.themes').get_dropdown {
          winblend = 0,
          previewer = false,
        })
      end, { desc = '[S]earch [H]elp' })

      vim.keymap.set('n', '<leader>sk', function()
        builtin.keymaps(require('telescope.themes').get_dropdown {
          winblend = 0,
          previewer = true,
        })
      end, { desc = '[S]earch [K]eymaps' })

      vim.keymap.set('n', '<leader>sf', function()
        -- You can pass additional configuration to telescope to change theme, layout, etc.
        -- builtin.fd {
        --   layout_config = { prompt_position = 'top', height = 20 },
        --
        --   sorting_strategy = 'ascending',
        -- }
        builtin.find_files(bottom_min)
        -- require 'telescope.themes'
        -- .get_dropdown {
        --          winblend = 0,
        --          previewer = true,
        --        }
        -- )
      end, { desc = '[S]earch [F]iles' })

      vim.keymap.set('n', '<C-t>', function()
        builtin.find_files(bottom_min)
        -- builtin.find_files {
        --   layout_config = { prompt_position = 'top', height = 20 },
        --   sorting_strategy = 'ascending',
        -- }
      end, { desc = '[S]earch [F]iles' })

      -- vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
      -- vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
      vim.keymap.set('n', '<leader>sw', function()
        builtin.grep_string(require('telescope.themes').get_ivy {
          winblend = 0,
          previewer = true,
        })
      end, { desc = '[S]earch current [W]ord' })

      vim.keymap.set('n', '<leader>sg', function()
        -- builtin.spell_suggest
        term = vim.fn.input 'Grep >'
        builtin.grep_string(require('telescope.themes').get_ivy {
          winblend = 0,
          previewer = true,
          border = false,
          search = term,
          layout_config = {
            height = 15,
          },
        })
      end, { desc = '[S]earch by [G]rep' })

      vim.keymap.set('n', '<leader>sd', function()
        builtin.diagnostics(bottom_min)
      end, { desc = '[S]earch [D]iagnostics' })

      vim.keymap.set('n', '<leader>sr', function()
        builtin.oldfiles(bottom_min)
      end, { desc = '[S]earch Recent Files ("." for repeat)' })

      -- vim.keymap.set('n', '<leader>sb', function()
      --   builtin.buffers(require('telescope.themes').get_dropdown {
      --     winblend = 0,
      --     previewer = false,
      --   })
      -- end, { desc = '[ ] Find existing buffers' })

      -- vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
      -- Slightly advanced example of overriding default behavior and theme
      vim.keymap.set('n', '<leader>sb', function()
        -- You can pass additional configuration to telescope to change theme, layout, etc.
        builtin.current_buffer_fuzzy_find(require('telescope.themes').get_ivy {
          winblend = 0,
          previewer = false,
        })
      end, { desc = '[/] Fuzzily search in current buffer' })

      -- Also possible to pass additional configuration options.
      --  See `:help telescope.builtin.live_grep()` for information about particular keys
      vim.keymap.set('n', '<leader>s/', function()
        builtin.live_grep {
          grep_open_files = true,
          prompt_title = 'Live Grep in Open Files',
        }
      end, { desc = '[S]earch [/] in Open Files' })

      -- Shortcut for searching your neovim configuration files
      vim.keymap.set('n', '<leader>sn', function()
        builtin.find_files { cwd = vim.fn.stdpath 'config' }
      end, { desc = '[S]earch [N]eovim files' })

      vim.keymap.set('n', '<leader>sm', function()
        builtin.marks(require('telescope.themes').get_dropdown {
          prompt_title = 'marks',
          previewer = false,
        })
      end, { desc = '[S]earch [M]arks' })

      vim.keymap.set('n', '<leader>pr', function()
        builtin.registers(require('telescope.themes').get_dropdown {
          prompt_title = 'registers',
          previewer = false,
        })
      end, { desc = '[P]aste [R]egisters' })

      vim.keymap.set('n', '<leader>q', ':Telescope diagnostics<CR>', { desc = 'search diagnostic' })
    end,
  },

  { -- LSP Configuration & Plugins
    'neovim/nvim-lspconfig',
    dependencies = {
      -- Automatically install LSPs and related tools to stdpath for neovim
      { 'williamboman/mason.nvim', config = true },
      'williamboman/mason-lspconfig.nvim',
      'WhoIsSethDaniel/mason-tool-installer.nvim',

      -- Useful status updates for LSP.
      -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
      { 'j-hui/fidget.nvim', opts = {} },
    },
    config = function()
      -- Brief Aside: **What is LSP?**
      --
      -- LSP is an acronym you've probably heard, but might not understand what it is.
      --
      -- LSP stands for Language Server Protocol. It's a protocol that helps editors
      -- and language tooling communicate in a standardized fashion.
      --
      -- In general, you have a "server" which is some tool built to understand a particular
      -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc). These Language Servers
      -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
      -- processes that communicate with some "client" - in this case, Neovim!
      --
      -- LSP provides Neovim with features like:
      --  - Go to definition
      --  - Find references
      --  - Autocompletion
      --  - Symbol Search
      --  - and more!
      --
      -- Thus, Language Servers are external tools that must be installed separately from
      -- Neovim. This is where `mason` and related plugins come into play.
      --
      -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
      -- and elegantly composed help section, `:help lsp-vs-treesitter`

      --  This function gets run when an LSP attaches to a particular buffer.
      --    That is to say, every time a new file is opened that is associated with
      --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
      --    function will be executed to configure the current buffer
      vim.api.nvim_create_autocmd('LspAttach', {
        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
        callback = function(event)
          -- NOTE: Remember that lua is a real programming language, and as such it is possible
          -- to define small helper and utility functions so you don't have to repeat yourself
          -- many times.
          --
          -- In this case, we create a function that lets us more easily define mappings specific
          -- for LSP related items. It sets the mode, buffer and description for us each time.
          local map = function(keys, func, desc)
            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
          end

          -- Jump to the definition of the word under your cursor.
          --  This is where a variable was first declared, or where a function is defined, etc.
          --  To jump back, press <C-T>.
          map('gd', function()
            require('telescope.builtin').lsp_definitions(require('telescope.themes').get_ivy {})
          end, '[G]oto [D]efinition')
          map('<C-g>', vim.lsp.buf.signature_help, 'signature')

          -- Find references for the word under your cursor.
          map('gr', function()
            require('telescope.builtin').lsp_references(require('telescope.themes').get_ivy {})
          end, '[G]oto [R]eferences')

          --goto type definations
          map('gtd', vim.lsp.buf.type_definition, '[G]oto [T]Type [D]Definations')

          --show diagnostics in a floating window
          map('gl', vim.diagnostic.open_float, '')
          -- Jump to the implementation of the word under your cursor.
          --  Useful when your language has ways of declaring types without an actual implementation.
          map('gi', function()
            require('telescope.builtin').lsp_implementations(require('telescope.themes').get_ivy {})
          end, '[G]oto [I]mplementation')

          -- Jump to the type of the word under your cursor.
          --  Useful when you're not sure what type a variable is and you want to see
          --  the definition of its *type*, not where it was *defined*.
          map('<leader>D', function()
            require('telescope.builtin').lsp_type_definitions(require('telescope.themes').get_ivy {})
          end, 'Type [D]efinition')

          -- Fuzzy find all the symbols in your current document.
          --  Symbols are things like variables, functions, types, etc.
          map('<leader>ds', function()
            require('telescope.builtin').lsp_document_symbols(require('telescope.themes').get_ivy {})
          end, '[D]ocument [S]ymbols')

          -- Fuzzy find all the symbols in your current workspace
          --  Similar to document symbols, except searches over your whole project.
          map('<leader>ws', function()
            require('telescope.builtin').lsp_dynamic_workspace_symbols(require('telescope.themes').get_ivy {})
          end, '[W]orkspace [S]ymbols')

          -- Rename the variable under your cursor
          --  Most Language Servers support renaming across files, etc.
          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')

          -- Execute a code action, usually your cursor needs to be on top of an error
          -- or a suggestion from your LSP for this to activate.
          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')

          -- Opens a popup that displays documentation about the word under your cursor
          --  See `:help K` for why this keymap
          map('K', vim.lsp.buf.hover, 'Hover Documentation')

          -- WARN: This is not Goto Definition, this is Goto Declaration.
          --  For example, in C this would take you to the header
          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')

          -- The following two autocommands are used to highlight references of the
          -- word under your cursor when your cursor rests there for a little while.
          --    See `:help CursorHold` for information about when this is executed
          --
          -- When you move your cursor, the highlights will be cleared (the second autocommand).
          local client = vim.lsp.get_client_by_id(event.data.client_id)

          if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
            map('<leader>th', function()
              vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
            end, '[T]oggle Inlay [H]ints')
          end
          if client and client.server_capabilities.documentHighlightProvider then
            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.document_highlight,
            })

            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.clear_references,
            })
          end
        end,
      })

      -- LSP servers and clients are able to communicate to each other what features they support.
      --  By default, Neovim doesn't support everything that is in the LSP Specification.
      --  When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
      --  So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
      local capabilities = vim.lsp.protocol.make_client_capabilities()
      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())

      -- Enable the following language servers
      --  Feel free to add/remove any LSPs that you want here. They will automatically be installed.
      --
      --  Add any additional override configuration in the following tables. Available keys are:
      --  - cmd (table): Override the default command used to start the server
      --  - filetypes (table): Override the default list of associated filetypes for the server
      --  - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
      --  - settings (table): Override the default settings passed when initializing the server.
      --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
      local servers = {
        clangd = {},
        -- gopls = {},
        pyright = {},
        emmet_ls = {},
        rust_analyzer = {

          settings = {
            ['rust-analyzer'] = {
              checkOnSave = {
                command = 'clippy',
              },
              imports = {
                granularity = {
                  group = 'module',
                },
                prefix = 'self',
              },
              cargo = {
                buildScripts = {
                  enable = true,
                },
              },
              procMacro = {
                enable = true,
              },
              inlay_hints = {
                -- automatically set inlay hints (type hints)
                -- default: true
                auto = false,

                -- Only show inlay hints for the current line
                only_current_line = false,

                -- whether to show parameter hints with the inlay hints or not
                -- default: true
                show_parameter_hints = true,

                -- prefix for parameter hints
                -- default: "<-"
                parameter_hints_prefix = '<- ',

                -- prefix for all the other hints (type, chaining)
                -- default: "=>"
                other_hints_prefix = '=> ',

                -- whether to align to the length of the longest line in the file
                max_len_align = false,

                -- padding from the left if max_len_align is true
                max_len_align_padding = 1,

                -- whether to align to the extreme right or not
                right_align = false,

                -- padding from the right if right_align is true
                right_align_padding = 7,

                -- The color of the hints
                highlight = 'Comment',
              },
              diagnostics = {
                enable = true,
              },
            },
          },
        },
        -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
        --
        -- Some languages (like typescript) have entire language plugins that can be useful:
        --    https://github.com/pmizio/typescript-tools.nvim
        --
        -- But for many setups, the LSP (`tsserver`) will work just fine
        tsserver = {},

        ltex = {
          -- filetypes = { 'text', 'markdown', 'md', 'norg' },
          filetypes = { 'text' },
          settings = {
            ltex = {
              completionEnabled = true,
            },
          },
        },
        --

        lua_ls = {
          -- cmd = {...},
          -- filetypes { ...},
          -- capabilities = {},
          settings = {
            Lua = {
              runtime = { version = 'LuaJIT' },
              workspace = {
                checkThirdParty = false,
                -- Tells lua_ls where to find all the Lua files that you have loaded
                -- for your neovim configuration.
                library = {
                  '${3rd}/luv/library',
                  unpack(vim.api.nvim_get_runtime_file('', true)),
                },
                -- If lua_ls is really slow on your computer, you can try this instead:
                -- library = { vim.env.VIMRUNTIME },
              },
              completion = {
                callSnippet = 'Replace',
              },
              -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
              -- diagnostics = { disable = { 'missing-fields' } },
            },
          },
        },
      }

      -- require'lspconfig'.rust_analyzer.setup{
      --   settings = {
      --     ['rust-analyzer'] = {
      --       diagnostics = {
      --         enable = false;
      --       }
      --     }
      --   }
      -- }
      -- Ensure the servers and tools above are installed
      --  To check the current status of installed tools and/or manually install
      --  other tools, you can run
      --    :Mason
      --
      --  You can press `g?` for help in this menu
      require('mason').setup()

      -- You can add other tools here that you want Mason to install
      -- for you, so that they are available from within Neovim.
      local ensure_installed = vim.tbl_keys(servers or {})
      vim.list_extend(ensure_installed, {
        'stylua', -- Used to format lua code
      })
      require('mason-tool-installer').setup { ensure_installed = ensure_installed }

      require('mason-lspconfig').setup {
        handlers = {
          function(server_name)
            local server = servers[server_name] or {}
            -- This handles overriding only values explicitly passed
            -- by the server configuration above. Useful when disabling
            -- certain features of an LSP (for example, turning off formatting for tsserver)
            server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
            require('lspconfig')[server_name].setup(server)
          end,
        },
      }
    end,
  },

  { -- Autoformat
    'stevearc/conform.nvim',
    opts = {
      notify_on_error = false,
      format_on_save = {
        timeout_ms = 500,
        lsp_fallback = true,
      },
      formatters_by_ft = {
        lua = { 'stylua' },
        -- Conform can also run multiple formatters sequentially
        python = { 'isort', 'black' },
        rust = { 'rustfmt' },
        --
        -- You can use a sub-list to tell conform to run *until* a formatter
        -- is found.
        javascript = { { 'prettierd', 'prettier' } },
      },
    },
  },

  { -- Autocompletion
    'hrsh7th/nvim-cmp',
    event = 'InsertEnter',
    dependencies = {
      -- Snippet Engine & its associated nvim-cmp source
      {
        'L3MON4D3/LuaSnip',
        'onsails/lspkind.nvim',
        build = (function()
          -- Build Step is needed for regex support in snippets
          -- This step is not supported in many windows environments
          -- Remove the below condition to re-enable on windows
          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
            return
          end
          return 'make install_jsregexp'
        end)(),
      },
      'saadparwaiz1/cmp_luasnip',

      -- Adds other completion capabilities.
      --  nvim-cmp does not ship with all sources by default. They are split
      --  into multiple repos for maintenance purposes.
      'hrsh7th/cmp-nvim-lsp',
      'hrsh7th/cmp-path',
      'hrsh7th/cmp-buffer',

      -- If you want to add a bunch of pre-configured snippets,
      --    you can use this plugin to help you. It even has snippets
      --    for various frameworks/libraries/etc. but you will have to
      --    set up the ones that are useful for you.
      'rafamadriz/friendly-snippets',
    },
    config = function()
      -- See `:help cmp`
      local cmp = require 'cmp'
      local luasnip = require 'luasnip'
      luasnip.config.set_config {
        history = true,
        update_events = 'TextChanged, TextChangedI',
        enable_autosnippets = true, -- not sure yet
        ext_opts = {
          [require('luasnip.util.types').choiceNode] = {
            active = {
              virt_text = { { '<-- Choice Node' } },
            },
          },
        },
      }
      require('luasnip.loaders.from_vscode').lazy_load()
      cmp.setup {
        snippet = {
          expand = function(args)
            luasnip.lsp_expand(args.body)
          end,
        },
        formatting = {
          format = require('nvim-highlight-colors').format,
        },
        completion = { completeopt = 'menu,menuone,noinsert' },

        -- For an understanding of why these mappings were
        -- chosen, you will need to read `:help ins-completion`
        --
        -- No, but seriously. Please read `:help ins-completion`, it is really good!
        mapping = cmp.mapping.preset.insert {
          -- Select the [n]ext item
          ['<C-n>'] = cmp.mapping.select_next_item(),
          -- Select the [p]revious item
          ['<C-p>'] = cmp.mapping.select_prev_item(),

          -- Scroll the documentation window [b]ack / [f]orward
          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
          ['<C-f>'] = cmp.mapping.scroll_docs(4),
          -- Accept ([y]es) the completion.
          --  This will auto-import if your LSP supports it.
          --  This will expand snippets if the LSP sent a snippet.
          ['<C-y>'] = cmp.mapping.confirm { select = true },

          -- Manually trigger a completion from nvim-cmp.
          --  Generally you don't need this, because nvim-cmp will display
          --  completions whenever it has completion options available.
          ['<C-Space>'] = cmp.mapping.complete {},

          -- Think of <c-l> as moving to the right of your snippet expansion.
          --  So if you have a snippet that's like:
          --  function $name($args)
          --    $body
          --  end
          --
          -- <c-l> will move you to the right of each of the expansion locations.
          -- <c-h> is similar, except moving you backwards.
          -- TODO: ERROR
          ['<C-l>'] = cmp.mapping(function()
            if luasnip.expand_or_locally_jumpable() then
              luasnip.expand_or_jump()
            end
          end, { 'i', 's' }),
          ['<C-h>'] = cmp.mapping(function()
            if luasnip.locally_jumpable(-1) then
              luasnip.jump(-1)
            end
          end, { 'i', 's' }),
        },
        sources = {
          { name = 'nvim_lsp' },
          { name = 'luasnip' },
          { name = 'path' },
          { name = 'orgmode' },
        },
        -- formatting = {
        --   format = require('lspkind').cmp_format {
        --     mode = 'symbol', -- show only symbol annotations
        --     maxwidth = 50, -- prevent the popup from showing more than provided characters (e.g 50 will not show more than 50 characters)
        --     -- can also be a function to dynamically calculate max width such as
        --     -- maxwidth = function() return math.floor(0.45 * vim.o.columns) end,
        --     ellipsis_char = '...', -- when popup menu exceed maxwidth, the truncated part would show ellipsis_char instead (must define maxwidth first)
        --     show_labelDetails = true, -- show labelDetails in menu. Disabled by default
        --
        --     -- The function below will be called before any actual modifications from lspkind
        --     -- so that you can provide more controls on popup customization. (See [#30](https://github.com/onsails/lspkind-nvim/pull/30))
        --     -- before = function (entry, vim_item)
        --     --   ...
        --     --   return vim_item
        --     -- end
        --   },
        -- },
      }
    end,
  },

  { -- You can easily change to a different colorscheme.
    -- Change the name of the colorscheme plugin below, and then
    -- change the command in the config to whatever the name of that colorscheme is
    --
    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`
    'folke/tokyonight.nvim',
    priority = 1000, -- make sure to load this before all the other start plugins
    init = function()
      -- Load the colorscheme here.
      -- Like many other themes, this one has different styles, and you could load
      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
      require('tokyonight').setup {
        transparent = true,
      }
      vim.cmd.colorscheme 'tokyonight-night'

      -- You can configure highlights by doing something like
      vim.cmd.hi 'Comment gui=none'
    end,
  },

  -- Highlight todo, notes, etc in comments
  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },

  { -- Collection of various small independent plugins/modules
    'echasnovski/mini.nvim',
    config = function()
      -- Better Around/Inside textobjects
      --
      -- Examples:
      --  - va)  - [V]isually select [A]round [)]paren
      --  - yinq - [Y]ank [I]nside [N]ext [']quote
      --  - ci'  - [C]hange [I]nside [']quote
      -- require('mini.ai').setup { n_lines = 500 }

      -- Add/delete/replace surroundings (brackets, quotes, etc.)
      --
      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
      -- - sd'   - [S]urround [D]elete [']quotes
      -- - sr)'  - [S]urround [R]eplace [)] [']
      require('mini.surround').setup()

      -- Simple and easy statusline.
      --  You could remove this setup call if you don't like it,
      --  and try some other statusline plugin
      -- local statusline = require 'mini.statusline'
      -- -- set use_icons to true if you have a Nerd Font
      -- statusline.setup { use_icons = vim.g.have_nerd_font }
      --
      -- -- You can configure sections in the statusline by overriding their
      -- -- default behavior. For example, here we set the section for
      -- -- cursor location to LINE:COLUMN
      -- ---@diagnostic disable-next-line: duplicate-set-field
      -- statusline.section_location = function()
      --   return '%2l:%-2v'
      -- end

      -- ... and there is more!
      --  Check out: https://github.com/echasnovski/mini.nvim
    end,
  },

  { -- Highlight, edit, and navigate code
    'nvim-treesitter/nvim-treesitter',
    build = ':TSUpdate',
    config = function()
      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
      require('nvim-treesitter.install').prefer_git = true
      -- require 'nvim-treesitter.install'
      local opts = {
        ensure_installed = { 'cpp', 'python', 'bash', 'c', 'html', 'lua', 'markdown', 'vim', 'vimdoc' },
        ignore_install = { 'org' },
        -- Autoinstall languages that are not installed
        auto_install = true,
        highlight = { enable = true },
        indent = { enable = true },
        incremental_selection = {
          enable = true,
          keymaps = {
            init_selection = '<C-space>',
            node_incremental = '<C-Space>',
            scope_incremental = false,
            node_decremental = '<bs>',
          },
        },
      }
      ---@diagnostic disable-next-line: missing-fields
      require('nvim-treesitter.configs').setup(opts)
      -- There are additional nvim-treesitter modules that you can use to interact
      -- with nvim-treesitter. You should go explore a few and see what interests you:
      --
      --    - incremental selection: included, see `:help nvim-treesitter-incremental-selection-mod`
      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
    end,
  },

  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
  -- init.lua. If you want these files, they are in the repository, so you can just download them and
  -- put them in the right spots if you want.

  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart
  --
  --  Here are some example plugins that I've included in the kickstart repository.
  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
  --
  require 'kickstart.plugins.debug',
  require 'kickstart.plugins.indent_line',

  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
  --    This is the easiest way to modularize your config.
  --
  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
  { import = 'custom.plugins' },
}, {
  ui = {
    -- If you have a Nerd Font, set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})

vim.schedule(function()
  require 'snippets.cpp'
  require 'snippets.cf-cpp'
end)

require('cmp').setup.filetype({ 'sql' }, {
  sources = {
    { name = 'vim-dadbod-completion' },
    { name = 'buffer' },
  },
})

-- vim.cmd [[
-- set laststatus=3
-- ]]
vim.go.laststatus = 3
-- vim.go.winbar = '%=%f %m'
--

vim.api.nvim_set_hl(0, 'LineNrAbove', { fg = '#F6F6F6' })
vim.api.nvim_set_hl(0, 'LineNrBelow', { fg = '#F6F6F6' })