ping -I eth0 www.baid.com
ping -I wlan0 www.baidu.com
ip ru show table eth0
07-24 03:34:26.090 429 537 D WifiNetworkFactory: evalRequest
07-24 06:00:35.946 428 538 D WifiNetworkFactory: n.requests = true
07-24 06:00:35.946 428 538 D WifiNetworkFactory: n.score = 70
07-24 06:00:35.946 428 538 D WifiNetworkFactory: mScore = 80
07-24 06:00:35.946 428 538 D WifiNetworkFactory: n.factorySerialNumber = -1
07-24 06:00:35.946 428 538 D WifiNetworkFactory: mSerialNumber = 4
07-24 06:00:35.946 428 538 D WifiNetworkFactory: done
07-24 06:01:05.873 428 541 D ConnectivityService: handleLingerComplete for NetworkAgentInfo [WIFI () - 103]
07-24 06:01:58.721 428 1119 D ConnectivityService: requestNetwork for uid/pid:1000/751 NetworkRequest [ TRACK_DEFAULT id=57, [ Capabilities: INTERNET&NOT_RESTRICTED&TRUSTED Uid: 1000] ]
07-24 06:01:58.722 428 538 D UntrustedWifiNetworkFactory: got request NetworkRequ
ifconfig wlan0 down
iwconfig wlan0 mode monitor
ifconfig wlan0 up
svc wifi enable
svc wifi disable
在/data/misc/wifi/wpa_supplicant.conf添加
network={
ssid="*******" #表示wifi热点名
psk="*******" #表示密码
key_mgmt=WPA-PSK #加密方式
#key_mgmt-NONE 不加密
}
未启动
wpa_supplicant -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf
svc wifi enable
adb reboot
已启动
wpa_cli reconfigure
wpa_cli reconnect
没有加密或者wep或者使用指令，没有办法，一般都是要使用wpa的使用以上该改法
iwlist scanning | grep ESSID
iw dev wlan0 scan |grep SSID
iw dev wlan0 connect "HUAWEI P10" key 0:3143531435
连接隐藏ssid命令：
1. wpa加密
wpa_cli IFNAME=wlan0 add_network
wpa_cli IFNAME=wlan0 set_network 0 ssid \"ASUS_AP1\"
wpa_cli IFNAME=wlan0 set_network 0 key_mgmt WPA-PSK
wpa_cli IFNAME=wlan0 set_network 0 psk \"66666666\"
wpa_cli IFNAME=wlan0 set_network 0 priority 0
wpa_cli IFNAME=wlan0 set_network 0 scan_ssid 1
wpa_cli IFNAME=wlan0 enable_network 0
wpa_cli save_config
2. wep加密
wpa_cli IFNAME=wlan0 add_network
wpa_cli IFNAME=wlan0 set_network 0 ssid \"ASUS_AP1\"
wpa_cli IFNAME=wlan0 set_network 0 key_mgmt NONE
wpa_cli IFNAME=wlan0 set_network 0 auth_alg OPEN SHARED
wpa_cli IFNAME=wlan0 set_network 0 wep_key0 \"66666666\"
wpa_cli IFNAME=wlan0 set_network 0 wep_tx_keyidx 0
wpa_cli IFNAME=wlan0 set_network 0 priority 0
wpa_cli IFNAME=wlan0 set_network 0 scan_ssid 1
wpa_cli IFNAME=wlan0 enable_network 0
wpa_cli save_config
3. 无加密
wpa_cli IFNAME=wlan0 add_network
wpa_cli IFNAME=wlan0 set_network 0 ssid \"ASUS_AP1\"
wpa_cli IFNAME=wlan0 set_network 0 key_mgmt NONE
wpa_cli IFNAME=wlan0 set_network 0 priority 0
wpa_cli IFNAME=wlan0 set_network 0 scan_ssid 1
wpa_cli IFNAME=wlan0 enable_network 0
wpa_cli save_config
cat /proc/net/rtl88x2cs/wlan0/survey_info
wpa_cli -iwlan0 scan/scan_r
wpa_cli -iwlan0 log_level debug & logcat -s wpa_supplicat
ifconfig eth0 up
ifconfig eth0 192.168.1.100 broadcast 192.168.1.255 netmask 255.255.255.0 up
单网卡添加多个IP地址
ifconfig eth0:0 192.168.1.100 netmask 255.255.255.0 up
ifconfig eth0:1 192.168.2.100 netmask 255.255.255.0 up
若转换不了域名 主要是域名问题
echo "nameserver 8.8.8.8" > /etc/resolv.conf
或者
ndc resolver setnetdns eth0 "" 8.8.8.8
用ip route
ip addr add 192.168.1.100/24 dev eth0
ip link set dev eth0 up
echo "nameserver 8.8.8.8" > /etc/resolv.conf或者ndc resolver setnetdns eth0 "" 8.8.8.8 8.8.4.4
ip route add default via 192.168.1.1 dev eth0
更改路由的优先级
route del default gw 192.168.10.1 dev eth0
route add default gw 192.168.10.1 dev eth0 metric 99