NVME Final Setup

[bobreese]

FPP 8.X
In order to complete an nvme setup after going thru the FPP Setting / Flash to SD,
One has to bring up an ssh, and run the raspi-config application.
Go to Advanced Options
Go to Boot Order
And then choose NVMe / USB Boot
Save and exit.

If there is another way that the Flash to SD could script this would be great.

[darylc]

@bobreese There is already code to take care of this as part of the copy to NVME code. Did you get any errors prior to doing this?

[bobreese]

The install and configuration of the nvme showed no information good or bad.
I checked the logs (even after setting Debug mode), nothing showed up.
Just removing the SD card, the nvme would not boot.
I had to run the Configuration Tool manually to get it to work....